Headphone

Warning: mkdir() [function.mkdir]: Permission denied in /home/webs/affiliatelib2/CacheManager.php on line 12

Warning: mkdir() [function.mkdir]: No such file or directory in /home/webs/affiliatelib2/CacheManager.php on line 12

Warning: fopen(/home/templatecore2cache//*cluesnet.com/c7/c730da9ea5d900a6b37d435a0b8f13d84c5449e4.tc2cache) [function.fopen]: failed to open stream: No such file or directory in /home/webs/affiliatelib2/CacheManager.php on line 130

Warning: fwrite(): supplied argument is not a valid stream resource in /home/webs/affiliatelib2/CacheManager.php on line 131

Warning: fclose(): supplied argument is not a valid stream resource in /home/webs/affiliatelib2/CacheManager.php on line 132

Headphones (also known as earphones, earbuds, stereophones, headsets, or by the slang term cans) are a pair of tiny loudspeakers, or less commonly a single speaker, with a way of holding them close to a user's ears and a means of connecting them to a stereophonic or Monaural, or binaural audio-frequency signal source such as an audio amplifier, radio, etc. In the context of telecommunication, the term headset is used to describe a combination of headphone and microphone used for two-way communication, for example with a telephone.

Since the introduction of the Walkman and later the iPod and other MP3 players headphones have become a very popular way of listening to stereo, especially among the younger generation. This is despite the fact that headphones are not really suitable for stereo, which is a system designed specifically for loudspeaker reproduction and relying primarily on loudness differences between channels for spacial effect. Headphones are ideally suited to binaural recordings, especially dummy head recordings which use phase difference or time delay for sound location. It is because of this fact that listening to stereo on headphones tends to produce the effect of sound coming from 'within the head', as well as extreme pulling to one side leading to a sense of deafness in the other ear, for example on cymbals which might be reproduced through one channel predominantly, though our brain expects them to be heard by both ears, though muffled and delayed in one by the shadow effect of the head. The effect can be alleviated to some degree by use of a shuffler or crossfeed device.

History

The telephone earpiece such as the one pictured at the right was common around the turn of the 20th century. Sensitive headphones were the only way to listen to audio signals before amplifiers were developed. Very sensitive headphones such as those manufactured by Brandes (Fig.1) around 1919 were commonly used for early radio work.

Applications Headphones can be used both with fixed equipment such as Compact disc player or DVD players, home theater, personal computers and with portable devices (e.g. digital audio player/mp3 player, mobile phone, etc.). Some cordless headphones do not need to be connected via a wire, receiving a radio or infrared signal encoded using a radio or infrared transmission link, like frequency modulation, Bluetooth or Wi-Fi. These are actually made of powered receiver systems of which the headphone is only a component.

Headphones are widely used for listening to audio sources for recreation. In the professional audio sector headphones are used in live situations by disc jockeys (DJ) and sound engineers for monitoring signal sources. In radio studios, DJs use a pair of headphones when talking to the microphone while the speakers are turned off, to eliminate acoustic feedback and monitor their own voice. In studio recordings, musicians and singers use headphones to play along to a backing track.

Wired headphones are attached to an audio source. The most common connectors are 1/4" and 3.5 mm stereophonic jack plugs and sockets. The older 1/4" standard is used on professional equipment, and is often used on fixed equipment. Sony introduced the smaller and cheaper, and now widely-used, 3.5 mm stereo connector in 1979, adapting the older Monaural 3.5 mm connector for use with its Walkman portable stereo tape player. Adapters are available for converting between 1/4" and 3.5 mm devices.

Types of Headphones By form factor iPod, rest in the outer part of the ear canal.

Circumaural Circumaural headphonesExamples of the circumaural design (without intending to endorse any model or brand) include: AKG Acoustics K501, Audio-Technica ATH-A900, Beyerdynamic DT880, Sennheiser HD650, Sony Sony MDR-7506, Koss Corporation Pro/4AA, Ultrasone HFI-2200 ULE, Bose (company) QuietComfort 2 and Around-Ear (first released as TriPort) headphones. have pads that go around the ears, usually very large and very comfortable. This is the type commonly used in recording studios and among audio enthusiasts.

Supra-aural Supra-aural headphonesExamples of the supra-aural design (without intending to endorse any model or brand) include: Grado Labs SR-60, Koss Corporation Porta Pro, Sennheiser PX-100, Ultrasone iCans, Bose (audio) Bose Headphone Family) headphones. are much like circumaural, only the pads go on top of the ear, making them lighter and smaller. They may have circled pads, much like circumaural headphones, only smaller and go on top of the ear. (e.g. the Sony MDRV600) They may also have basic, "open" pads. (e.g. Sennheiser PX100) They were commonly bundled with personal stereos during the 1980s.

Earbuds/Earphones Earbuds or earphones are headphones of a smaller size that are placed directly outside of the ear canal, but without fully enveloping it. They are generally inexpensive and are favored for their portability and convenience. However, due to their inability to provide isolation, they are not capable of delivering the same dynamic range offered by many full-sized headphones and canalphones for a given volume level. As a result, they are often used at higher volumes in order to drown out noise from the user's surroundings, which increases the risk of hearing-loss.http://www.ear-hearing.com/pt/re/earhearing/abstract.00003446-200412000-00001.htm

During the 1990s and 2000s, earbuds became a common type bundled with personal music devices; for example, the headphones included with the iPod are earbuds.

====Canalphones====Canalphones, also known as interruptible foldback systems (IFB), are earbuds that sit directly inside the ear canal. Although canalphones offer portability similar to earbuds, it often acts as an earplug to block out environmental noise (utilizing “closed-canal” technology to create an acoustic seal).

There are two main types of IFBs — universal and custom. Universal canalphones provide one or more stock sleeve size(s) to fit various ear canals (which are commonly made out of silicone rubber, elastomer, or foam) for noise isolation. Universal canalphones are typically marketed to casual listeners and are relatively inexpensive. Custom canalphones are fitted to individuals. Castings of the ear canals are made, usually by an audiologist. The manufacturer uses the castings to create custom-molded silicone rubber or elastomer plugs that provide added comfort and noise isolation. Because of the individualized labor involved, custom IFBs are more expensive than universal IFBs.

By driver technology The drivers are the primary provider of sound in the headphones.

Dynamic The dynamic (i.e., electrodynamic) driver is the most common type used in headphones. This operating principle consists of a stationary magnet element affixed to the frame of the headphone which sets up a static magnetic field. The magnetic element in headphones is typically composed of Ferrite (magnet) or neodymium. The diaphragm, typically fabricated from lightweight, high stiffness to mass ratio cellulose, polymer, carbon material, or the like, is attached to a coil of wire which is immersed in the static magnetic field of the stationary magnet. The diaphragm is actuated by the attached voice coil, when an audio current is passed through the coil. The alternating magnetic field produced by the current flowing through the coil reacts against the static magnetic field in turn, causing the coil and attached diaphragm to move the air, thus producing sound. Modern dynamic headphone drivers were derived from dynamic microphone capsules.

Electrostatic A thin, electrostatically charged diaphragm (typically a coated PET film (biaxially oriented) membrane), is suspended between two perforated metal plates (electrodes). The electrical sound signal is applied to the electrodes creating an electrical field; depending on the polarity of this field, the membrane is drawn towards one of the plates. Air is forced through the perforations; combined with a continuously changing electrical signal oscillating the membrane, a sound wave is generated.

Typically electrostatic headphones are more expensive than dynamic, and are relatively rare.Examples of electrostatic headphones are Koss ESP/950, Stax SR-007 Omega II, and Sennheiser HE90 “Orpheus”. NB: no endorsement of the respective brands/models is implied. In addition, a special amplifier is required to amplify the signal to oscillate the membrane, which often requires electrical potentials in the range of 100 to 1000 volts.

Balanced armature Balanced armature is a sound transducer design intended to eliminate the stress on the diaphragm characteristic of many other magnetic transducer systems.

As shown schematically in the first diagram, it consists of a moving magnetic armature that is pivoted so it can move in the field of the permanent magnet. When precisely centered in the magnetic field there is no net force on the armature, hence the term 'balanced.' As illustrated in the second diagram, when Electric current flows through the coil, it Electromagnet the armature one way or the other, causing it to rotate slightly one way or the other about the pivot thus moving the Diaphragm (acoustics) to make Sound.

The design does not completely achieve the objective of eliminating residual stress on the diaphragm because the diaphragm's equilibrium position in the magnetic field is unstable. At precise equlibrium, shown in the first diagram, there would be no net force on the armature or diaphragm. However, a slight error in that equilibrium position will cause an unbalancing force that increases the error. The more the armature rotates the greater the force to make it rotate further. The diaphragm stiffness is the only thing shown in the diagram resisting this avalanche of unbalancing force. Because it is impractical for an efficient diaphragm to maintain balance in this unstable system, an auxiliary restoring force (not shown) must be introduced to help hold the armature at equilibrium when no signal is applied. Therefore, the force from the armature must not only act on the diaphragm, it must also act on the restoring force.

This design gained popularity in the 1920s as the Baldwin Mica Diaphragm radio headphones. It was refined during World War II for use in Sound-powered telephone for military use; some of which achieved astonishing electro-acoustic conversion efficiencies in the 20% to 40% for narrow bandwidth voice signals. Furthermore, because this conversion is completely reversable, the same balanced armature design can convert sound to electricity with equal efficiency.Therefore, they are not only used as earphone elements, they are also commonly used as a microphone element too in the sound powered telephones.

Today they are usually used only in canalphones (due to their diminutive size and low impedance), such as Etymotic, Shure, Sensaphonics, Ultimate Ears and Westone. They generally are limited at the extremes of the hearing spectrum (16kHz) and require a seal more than other types of drivers to deliver their full potential. Some canalphones, like the Ultimate Ears super.fi 5EB, combine an armature driver (for high frequencies) and a small dynamic driver (for low frequencies), for the benefit of lower costs. For the higher-end models, such as super.fi 5 Pro and the Shure SE420/E5, two balanced armature drivers were utilized for a more balanced picture. Flagship models such as the Ultimate Ears UE-10, Shure E500/SE530, and Westone ES3 employ three balanced armature drivers with a view to enhance the sound towards perfection. However, multiple-driver earphones tend to have the problems of inaccurate spacing and emphasis in the bass department, thus losing some fidelity. (This is a general side-effect of extra crossover circuitry being implemented onto speakers or headphones). A couple of technologies was utilized to minimize these side effects, such as routing a balanced armature to handle a dedicated range of notes, utilizing a specialized port (or air duct) to allow air to flow through the armature for increased efficiency, and utilizing inline crossovers to ensure accurate reproduction of high, mid, and low notes to rectify these weaknesses. However, it also increased the implementation complexity and building cost.

Orthodynamic Orthodynamic or magnetostatic drivers are either comprised of a thinly pressed disc made of tightly coiled fine aluminium wire affixed to a mylar sheet or of a printed circuit. This disc is the diaphragm. The diaphragm is then sandwiched between two magnets which have the same polarity facing each other. As a result the magnets repel from each other and so the whole assembly is clamped together. An electrical signal is passed through the disc as it would be through the voice coil of a dynamic driver and the motion produced generates the sound. Once a popular choice for manufacturers such as Yamaha for their headphones, the technology has fallen generally into disuse as companies increasingly favour moving coil designs. Fostex continue to make orthodynamic headphones, although their fidelity is not generally well regarded in comparison with older orthodynamic designs.

Other Driver Designs Air Motion Transformer s and Piezoelectricity -PVDF/Kynar films can be used as headphone drivers. There is only one AMT and one piezoelectric headphone in current production.

By earcup enclosure Open Open headphones (sometimes marketed as “open air” headphones) have an open grille on the back of the driver, exposing the driver to the outside, and allowing the sound waves to propagate away from the ear freely. This backing type does not isolate the listener from outside sounds; in addition, sound through open headphones can be easily heard by others in the vicinity of the user (not always a desirable quality). They, however, usually have less sound distortion (due to the lack of resonance) and tighter controlled sound reproduction. Most audiophile-quality headphones, such as the AKG Acoustics K-701, Grado Labs GS1000, and Sennheiser HD 650 are open headphones.

====Closed====Closed headphones have a sealed backing, which attenuates sound waves propagating in the direction away from the ear. As a result, listeners away from the headphones cannot hear the produced sound easily. In addition, sound from outside is attenuated by the sealed backing, providing a level of isolation to the listener (typically a 10 dB decrease in outside sounds). A sealed chamber is often claimed to have a negative effect of distorting sound in certain instances and providing “boomier”, less controlled bass. Examples of closed headphones: AKG K271S, Audio-Technica ATH-A900, Sennheiser HD-280 Pro, Sony MDR-V6, Koss (company) Pro/4AA, Ultrasone HFI-550, Beyerdynamic DT-770, Rystl SH-400.

By Impedance Besides the construction of the sound producer, the amount of “External electric load” or impedance on the line is an important differentiating factor among headphone design. Many common headphones using a dynamic driver resting on or slightly in the ear have 32 ohms impedance. Smaller, in-the-ear types may have an impedance as low as 16 or 11 ohms. "Studio" and noise-reducing headphones tend to have much higher impedances, ranging from 300 in some cases to as high as 5000 ohms in other. Often portable devices designed to work with low-impedance headphones are unable to drive high-impedance headphones to high levels of sound.

By positioning Over the head The traditional style of headphones has a band or bands over the top of the head. This is especially prevalent for heavier headphones such as circum-aural designs, which would otherwise slip downward due to their weight.

Behind the head Designs with the headband behind the head are usually used in portable supra-aural headphones. They do not disturb one's hair like an over-the-head headband does, and can be worn with hats, etc. However, they are very uncomfortable when using them in lying on one's back or when sitting on a chair with headrest. This now-common style, sometimes referred to as "street-style," was popularized by Sony.

Clip The earpiece is secured with a clip that wraps around the base of the pinnae (outer ear), similar to eyeglass temples (thus potentially uncomfortable for anybody wearing eyeglasses). Usually used with earbuds, but also sometimes used with supra-aural headphones or canalphones.

In-ear Earbuds and canalphones sit on the concha of the pinnae or directly in the ear canal. They are compact and good to use during trips. However they can easily fall out of the ears and are not good to use during physical activities. These are the most popular kind of headphones.

Around the ear The earbuds are wrapped around the ear then put into the ear. Most used when the earbuds keep falling out of the ear because the earbud is too big or the ear is too small.

Under the chin This style is very rare in consumer headphones, using a U-shaped tension band suspended beneath the chin to hold transducers in the ears, similar to the design of stethoscopes. It was sometimes used in inexpensive airline headphones, although Sennheiser had a cordless model on the market for a short period.

Around the neck Some people prefer to hang their headphones around their neck, with the volume turned all the way up so that they can still hear the music. This allows the wearer to listen to other things, e.g. someone talking, while still listening to their music.

Benefits and limitations Headphones may be used to prevent other people from hearing the sound either for privacy or to prevent disturbance, as in listening in a public library. They can also provide a level of sound quality that could only be matched by speakers costing a great deal more. This is especially true in the bass (low frequency) region, where loudspeaker-listening room interactions normally cause resonant nodes, so that even with the best speakers, a listener in a given place hears some bass notes too loudly and others too softly. Good headphones, with a good seal to the ear, can have an extremely flat low-frequency response down to 20 Hz within 3dB. (Marketed claims such as 'frequency response 4 Hz to 20 kHz' are usually overstatements: the product's response at frequencies lower than 20 Hz is typically very small.) Those of the 'closed back' type are also used to exclude external sounds, particularly in sound recording studios and in noisy environments. Headphones have been reputed to better portray subtle layers of sound.{{cite news]| date = 2004-09-26 that use 3D positional audio, allowing players to better judge the position of an off-screen sound source (such as the footsteps of an opponent).

Although modern headphones are widely sold and used for listening to [Stereophonic sound, especially since the invention of the Walkman, some say they are fundamentally unsuited to such use. They supposedly produce the disconcerting effect of sound coming from the middle of the listener's head, with unnaturally isolated sounds occasionally appearing predominantly in one ear, giving the impression that the other has suddenly gone deaf. This is because stereo recordings represent the position of each sound by large amplitude differences between two channels intended for reproduction through a pair of loudspeakers. When the sounds from the two speakers mix, they create the phase (waves) difference our brain uses to locate direction. Others claim that stereo sounds better through headphones, because the right and left channels haven't mixed. This makes panning effects more easily appreciated, and adds a sense of immersion to the listening experience. binaural recording use a different microphone technique to encode direction directly as phase, with very little amplitude difference (except above 2 kHz) often using a dummy head recording, and can produce a surprisingly life-like spatial impression through headphones. Commercial recordings almost always use stereo recording, though, because, historically, loudspeaker listening was more popular than headphone listening. It is possible to improve the spatial effect from stereo on headphones by using frequency-dependent cross-feed between the channels, or—better still—a Blumlein shuffler (a custom EQ employed to augment the low-frequency content of the difference information in a stereo signal), though this is rarely done. While cross-feed can reduce the feeling of deafness in one ear, only the use of a dummy head recording during recording, with artificial pinna, can convincingly take away the "middle of the head" effect. Optimal sound is achieved when the dummy head matches the listener's head, since pinnae vary greatly in size and shape.

Headphones can have an ergonomic benefit over the traditional handset at office desks. They save space and many new models are wireless. They also allow call centre agents to maintain good human position instead of tilting their head sideways to cradle a transceiver#Telephony. They are also used in professional sound editing, so that more than one person can work on an audio track without interfering with another.

Over time, many wired headphone cables fail. A common scenario in which a replacement set might need to be purchased is the physical breakdown of copper wiring within the cords of many popular headphones. Over time, the connection formed to close the circuit may become severed due to stress fatigue.

Dangers and volume solutions Using headphones at a sufficiently high volume level can cause temporary or permanent hearing impairment or deafness due to an effect called "masking." The headphone volume has to compete with the background noise, especially in excessively loud places such as subway stations, airplanes, and large crowds. This leads to the disappearance of the normal pain associated with higher levels of volumes. Extended periods of the excessively loud volume is extremely damaging. Some manufacturers of portable music devices have attempted to introduce safety circuitry that limited output volume or warned the user when dangerous volume was being used, but the concept has been rejected by most of the buying public, which favors personal choice of high volume. Koss introduced the "Safelite" line of cassette players in 1983 with such a warning light. The line was discontinued two years later for lack of interest.

In recent years, interest has once again focused on protecting hearing, and companies have responded. Sony's AVLS feature corrects differences in track volumes as they are being played, and Apple's Sound Check normalizes the peak volumes of selected tracks in iTunes. Also, one may manipulate the volume tags, or Replay Gain, of MP3s; this method must be manually done by the user using third-party software, but is regarded to provide better consistency than the above options.

The France has imposed a limit on all music players sold in the country: they must not be capable of producing more than 100dbA (the threshold of hearing damage during extended listening is 80dB, and the threshold of pain, or of immediate hearing loss, is 130dB). Many decry this as an infringement on personal choice, and use third-party options to reverse the software volume caps placed on such devices. Others welcome the government's pro-health stance.

Other risks arise from the reduced awareness of external sounds—some jurisdictions regulate the use of headphones while driving vehicles, usually limiting the use of earphones to a single ear. The complete isolation from outside noise can be a hazard in itself, as a user could miss the sound of a car horn and walk into traffic with fatal consequences. Losing situational awareness can also lead to getting robbed, particularly in busy environments where bumping into another person would be ignored, e.g., subway stations.

Headphones#Canalphones (which sit directly in the ear canal, much as earplugs do) are generally believed to be safer than open-air headphones for use in noisy environments. The reason for this is that much of the external noise which is usually heard while using earphones/headphones is blocked out by canalphones, therefore allowing the user to listen at lower volumes without having to turn up the listening device (possibly to unsafe levels) to compete with background noise. (Canalphones are a passive counterpart to active noise cancellers, which use circuitry and interference to attenuate sound). Manufacturers of canalphones quote that their products reach an isolation level of -30dB to -40dB, while noise cancellers isolate by a degree of -15dB to -20dB. Headphones#Closed and noise-cancelling headphones can have a similar effect, although sound attenuation of the latter is usually limited in frequency range and amplitude: closed headphones do not isolate low frequency sounds very well, and noise cancellers do not attempt to attenuate high-pitched sounds.

See also

Noise-cancelling headphone
Subwoofer (Stereo separation)
Headphone amplifier

References

External links

The Audio Circuit - Information on and user reviews of loudspeakers, headphones, amplifiers, and playback equipment
Types of Headphones, Koss website
Headphone Gallery & Archive - Database of Headphone Specifications and Images
Headwize: A Resource Site for Headphones and Headphone Listening
HeadphoneReviews.org-A sister site of the Head-Fi forums; reviewers rate their headphones on criteria like bass extension/quality, comfort, soundstage, etc. No reviews of common, low-cost headphones.
Head-Case - Ad and Commercial Free, just-the-facts Forum Site for Headphone Fans. Can be a little more blunt in it's representation of things, and a lot more informal.
Headphonesguru : a resource site for headphones - tests, projects, DIY, articles, products, links.
Head-Fi: Covering Headphones, Earphones and Portable Audio
Headphone burn-in wave files (white noise, pink noise, frequency sweep)
Headphones and Audio IRC Chat room ( Java applet)

Headphones SALE | ipod Headphones, Sennheiser Headphones, Wireless ...
Headphones and ipod accessories from the world's largest online headphone and earphones store, specialising in iPod, wireless and Sennheiser headphones.

Headphone Selector. Find the right headphone!
The headphone selector finds and searches for headphones, earphones, in-ear, mp3 for all audio applications

Headphone Splitters: Belkin, monster and maxell headdphone splitters ...
Complete selection of headphone splitters ... Headphone Splitters Belkin Headphone Splitter Brand: Belkin Price: £0.01

HeadRoom - Right Between Your Ears
Selling headphones and headRoom and other headphone amplifiers and cables and accessories.

Headphones & earphones from Headphone World the World's Largest ...
The World's Largest Online Specalist Headphones Store. A UK-based online store with a wide range of headphones and earphones including in ear headphones, sports headphones ...

Headphone Shopping and Price comparison
Headphone Reviews, Price comparison and Shopping at dooyoo.co.uk ... Read reviews about Headphones. Compare prices on hundreds of makes and models of head phones, phone head sets ...

Headphone Accessories - Yes There Is Such A Thing!
Headphone Accessories The BestStuff Choice ... Ultra high quality headphone extension cable. 450cm long. 6.3mm plug to 6.3mm socket.

Headphone Accessories from Headphone World the World’s Largest ...
Even headphones need accessories! Get extra foam tips for your in-ear headphones, say goodbye to surplus headphone cables with a cable tidy or simply share you music using a cable ...

Headphone Amplifier
Headphone Amplifier ... Headphone Amplifier Circuit : Andy Collinson Email: anc@mitedu.freeserve.co.uk

Products - HeadRoom - Right Between Your Ears
Sometimes you know the general kind of headphone you want. Here's our advice on which sound amazing, available options, and how to get superb listening with that type of headphone.